FC2
Our FC2 Pump Controller is a dual pump capable single stage controller that comes with 1’ of 6 Gauge power and ground wire connected to an APP connector. When you purchase a FC2 with our Power and Ground Harness, the controller will come with 15’ of Red 6 Gauge Power Wire and 3’ of Black 6 Gauge Ground Wire; along with an 80AMP Inline Fuse Holder, Ring Terminal, Heat Shrink, and 2 Ferrules.
FC3
Our FC3 Pump Controller is a dual OR triple pump capable, two stage controller, that comes with 1’ of 4 Gauge power and ground wire connected to an APP connector. Our FC3 is capable of using a Pressure Switch to stage the pumps. When you purchase a FC3 with our Power and Ground Harness, the controller will come with 15’ of Red 4 Gauge Power wire, 3’ of Black 4 Gauge Ground wire, along with a 100AMP Inline Fuse Holder, Ring Terminal, Heat Shrink, and 2 Ferrules. When ordered with 3 pump pigtails, the FC3 Controller will come with 3 of our pump pigtails along with an additional set of connectors so you can attach them to your application.
|
|
