 |
 |
 |
|
Unassembled Delphi / Aptiv Metri Pack 280 series 4 pin female connector. Installer must have appropriate tools to assemble. Use on 12-14 AWG wire. Best practice is to use this connector (female terminals) on the power supply (hot) side. Use outside fuel tank only.
Two different seal sizes available, depending on insulation thickness. Choose as indicated below:
Blue: 3.45-4.30mm, use with the 12 AWG PVC insulated wire we offer
Green: 2.03-2.85mm, use with the 12 AWG PTFE insulated wire we offer
The following tools are acceptable for assembly:
- Delphi-Packard 12155975
- Waytek #533
- Sargent 3187CT
Maximum order quantity ONE per order. If you need larger quantities, please contact an electrical parts distributor.
HOW TO DEPIN A DELPHI / APTIV CONNECTOR
|
|
|
 |
|
 |
|